By May 16, 2019 0 Comments Read More →

APPLIED ROCK MECHANICS

APPLIED ROCK MECHANICS

Yogyakarta | 21 – 22 Mei 2019 | Rp. 6.000.000 Per Peserta
Yogyakarta | 25 – 27 Juni 2019 | Rp. 6.000.000 Per Peserta
Yogyakarta | 16 – 18 Juli 2019 | Rp. 6.000.000 Per Peserta
Yogyakarta | 27 – 29 Agustus 2019 | Rp. 6.000.000 Per Peserta

Jadwal Training 2019 Selanjutnya …

 

 

COURSE OVERVIEW TRAINING ROCK MECHANICS

Understanding the stress, strain, and failure mechanics of rocks and their response to earth stresses can lead to enormous economic benefits in all phases of mining development. Over the last ten years, rock mechanics has emerged as a critical technology capable of lowering financial risk in drilling and well completions, qualifying exploration and development opportunities, and improving hydrocarbon productivity. Rock mechanics is a vital decision-making tool for high-angle and horizontal drilling, deepwater drilling, massive hydraulic fracturing, and completing poorly cemented formations. New theory and experimental methods as well as straightforward computer modeling techniques have provided insight into developing prospects in complex geological basins and harsh drilling environments. In Applied Rock Mechanics training, participants are provided with basic theory, laboratory demonstrations, hands-on exercises, and computer modeling demonstrations. In addition to a comprehensive manual, software is provided for the student to perform wellbore stability calculations. The practical application of rock mechanics is emphasized. Applied Rock Mechanics training is designed to familiarize engineers and geoscientists with the necessary tools for immediate field application.

 

COURSE OBJECTIVES TRAINING ROCK MECHANICS

  • Determine the stress, strain, and failure mechanics of rocks;
  • Apply rock mechanics concepts and generate economic economics benefits ini mine design stability (this training leads to slope stability)

 

COURSE CONTENTS TRAINING ROCK MECHANICS

  • Introduction to rock mechanics and geomechanical principals
  • Basic mechanics: Stress and strain, elasticity, linear and non-linear effects, brittle and ductile rock behavior, poroelasticity, time-dependent-effects, consolidation and creep, normal and shear forces, hoop stresses, the Kirsch solution, 2-D and 3-D stress components, tensors, the stress ellipsoid, and basic rock failure (Mohr-Coulomb theory)
  • Rock mechanical properties: Ability to bear stresses, compressive strength, tensile strength, deformation response to stresses, elastic moduli, Poissons ratio
  • Slope stability
  • Apply rock mechanics concepts and generate economic economics benefits ini mine design stability
  • Pressure, stresses, and loads: Principal stresses, in-situ stress regime, total-stress and effective-stress, temperature effects, nature and origin of pore pressure
  • Geomechanics and structural geology: Faulting and folding, tectonics, regional structural analysis, regional and localized stress
  • Wellbore and field measurement of in-situ (earth) stresses: Stresses around boreholes, overburden stress, horizontal stresses, leakoff tests, mini-frac tests, formation testers, other pressure transient techniques, and tool deployment
  • Overview of common rock mechanics tests (lab demonstrations): unconfined compression, triaxial compression, hydrostatic compression, poly-axial, multi-stage triaxial, thick-walled cylinder, direct tensile strength, indirect (Brazilian) tensile strength, direct shear, uniaxial strain (compaction), and quick look (rock hardness) and scratch tests
  • Stress orientation techniques: Geological/mapping methods, wireline logging techniques, analastic strain recovery, differential strain curve analysis, acoustic anisotropy
  • Elastic, plastic, and viscous models of rock behavior: Deformation mechanisms and common models used in petroleum related rock mechanics
  • Slope stability and case histories (software demonstration)
  • Sand control: Review of sand production mechanisms, completion techniques in unstable formations, gravel pack design, special liners and screens, and case histories
  • Wireline log predicted mechanical properties: density logging, acoustic logging, Biot theory, dipole and multi-pole (dynamic) acoustic logging, seismic data and Amplitude Versus Offset (AVO), and shear- and compressional-wave anistropy (lab demonstration)
  • Data integration

 

WHO SHOULD ATTEND:

This training is recommended to be followed by: Drilling engineers, completion engineers, exploration and development geologists, engineers, core and log analysts, geophysicists and development staff.

 

COURSE INSTRUCTOR TRAINING ROCK MECHANICS

  • Untung Sukamto, M.T. & Team

Instructors are lecturers from UPN Veteran Yogyakarta, with a Master of Mining Engineering. He is a practitioner in the field of mining and often became an instructor in various training, workshops, and seminars in the field of mining in various companies.

 

COURSE METHODS TRAINING ROCK MECHANICS

  • Lecturing
  • Discussion/Sharing
  • Case Study
  • Simulation
  • Evaluation

 

JADWAL TRAINING 2019

  • Batch 5: 21 – 23 Mei 2019
  • Batch 6: 25 – 27 Juni 2019
  • Batch 7: 16 – 18 Juli 2019
  • Batch 8: 27 – 29 Agustus 2019
  • Batch 9: 24 – 26 September 2019
  • Batch 10: 15 – 17 Oktober 2019
  • Batch 11: 12 – 14 November 2019
  • Batch 12: 03 – 05 Desember 2019
  • 08.00 – 16.00 WIB

Yogyakarta: Cavinton Hotel Yogyakarta ; Neo Malioboro Hotel Yogyakarta Ibis Styles Hotel Yogyakarta
Surabaya: Hotel Santika Pandegiling Surabaya
Malang: Best Western OJ Hotel Malang ; Harris Hotel & Convention Malang
Jakarta: Dreamtel Jakarta Hotel ; Ibis Jakarta Tamarin Hotel
Bandung: Golden Flower Hotel Bandung ; Serela Merdeka Hotel Bandung
Bali: Ibis Bali Kuta Hotel ; Harris Kuta Raya Hotel Bali

In House Training : Depend on request

 

ROCK MECHANICS COURSE FEE 

  • 6.000.000 IDR / participant (for public training in Yogyakarta)  -> minimum quota of 2 participants
  • 7.000.000 IDR / participant (for public training in Bandung, Jakarta, Surabaya)  ->  minimum quota of 3 participants
  • 8.000.000 IDR / participant (for public training in Bali)  -> minimum quota of 3 participants

 

ROCK MECHANICS COURSE FACILITIES

INCLUDE:

  • Meeting Room at hotel
  • Coffe Break & Lunch
  • Module (hard & soft copy/flashdish)
  • Training Kit, Souvenir, Certificate
  • Airport pick up services
  • Transportation during training

EXCLUDE:

  • Penginapan peserta training
  • Tax (Ppn 10 %)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

Posted in: Mining, Yogyakarta

About the Author:

Post a Comment